FLOS000000 CAREL CABLE SENSOR - Flooding Detector Pinhole sensor
Update Terakhir
20 / 06 / 2020
Min. Pembelian
1 Unit
Harga
CALLBagikan
We have a long experience in electrical switchgear and control gear such as Low and Medium-Voltage Switchgear (up to 24 kV), Control Relay Panel, and Low Voltage Distribution and Lighting Panels also we supplies of superior quality materials such as panels ,air-conditioning & refrigeration system equipment, compressors, etc
Detail FLOS000000 CAREL CABLE SENSOR - Flooding Detector Pinhole Sensor
CABLE SENSOR
CAREL FLOS000000 - Flooding Detector Pinhole sensor
The new flood detecting device is able to sense the presence of water in an environment.
It is generally used to protect against flooding in computer rooms, offices, laboratories, special environments. It is made up of a detector (normally fitted on the electrical panel) and a sensor (installed in the position being checked).
When the sensor is wet by the water, the alarm is automatically activated on the detector, switching the status of the relay.
|
TECHNICAL FEATURES |
|
|
|
|
|
Power supply |
24 Vac (-15%...+10%), 50/60 Hz |
|
Power input |
1.5 VA |
|
Operating conditions |
-10T60 °C, <90% H.R. non-condensing |
|
Alarm relay output circuit |
250 Vac 2 A resisitive, 2 A inductive, cosfi=0.4, 2 (2) A, according to EN60730-1 (100.000 cycles) |
|
MAximum length of the probe connection cable |
500 m with single wire cable and double insulation |
|
Cross-section of the connection cable |
1.5 mm² |
|
Standard compliance |
CE EN 6000-6-2, EN 6000-6-4 (EMC), EN 61010-1 (safety) |
|
Index of protection |
IP40 |
